Legal Eagles

Firearm Sales

All firearm sales are shipped to United States locations only.

All firearms must be shipped to a Federal Firearms Licensee (FFL) in your state for pick-up by you.
     It will be necessary for you to arrange for a dealer to receive the shipment for you. It is required that they send us a
ORIGINAL SIGNED COPY, IN INK of their FFL.
   The "legal age" requirements vary by state and will need to be verified by the dealer receiving the item for you.

Find A Dealer For Your Transfer

The following dealers have registered with Gunbroker.com and indicate that they are willing to manage the firearms transfer for the buyer. You can search for a dealer by zip code or state.
Registered Dealers

Ammunition Sales

All ammunition sales are shipped to United States locations only.

  You must be at least 21 years of age to purchase ammunition from Firearms Dealer, Inc..
    It is required that you send us proof of your age (a Xerox copy of your driver's license is preferred).
    You must also send us the following
SIGNED statement:
    
   "I certify that there are no local, state or federal laws prohibiting my purchase or possession of ammunition."

State Sales Tax

    We must collect state sales tax from all Michigan residents

.

Shipping Requirements

Handguns will be shipped through the United States Postal Service to take advantage of the better rates for the buyer. If the buyer requires faster service such as "Next Day", etc., UPS will be used after special arrangements have been made by prior contact with F.D.I..

Long Guns will be shipped through the UPS to take advantage of the better rates for the buyer.

Ammunition will be shipped by UPS since it is not legal to ship ammunition through the United States Postal Service.

 

Form for your use

If you hit the "Form for your use" above, it will present a form that you can then print for the required signature.

Checklist For Your Purchases

We are developing a checklist which will make it much easier, and as foolproof as possible, for you to use when making a purchase.

Legal Definition of Assault Weapons

SEMIAUTOMATIC ASSAULT WEAPONS
and
LARGE CAPACITY AMMUNITION FEEDING DEVICES
under
Title 18, UNITED STATES CODE, CHAPTER 44
as amended by Public Law 103-322
The Violent Crime Control and Law Enforcement Act of 1994
(enacted September 13, 1994)


18 U.S.C. Chapter 44

921(a)(30) The term 'semiautomatic assault weapon' means -

(A) any of the firearms, or copies or duplicates of the firearms in any caliber, known as -
(i) Norinco, Mitchell, and Poly Technologies Avtomat Kalashnikovs (all models);
(ii) Action Arms Israeli Military Industries UZI and Galil
(iii) Beretta Ar70 (SC70);
(iv) Colt AR-15;
(v) Fabrique National FN/FAL, FN/LAR, and FNC;
(vi) SWD M-10, M-11, M-11/9, and M-12;
(vii) Steyr AUG
(viii) INTRATEC TEC-9, TEC DC-9, and TEC-22; and
(ix) revolving cylinder shotguns, such as (or similar to) the Street Sweeper and Striker 12;
(B) a semiautomatic rifle that has an ability to accept a detachable magazine and has at least 2 of -
(i) a folding or telescopic stock;
(ii) a pistol grip that protrudes conspicuously beneath the action of the weapon;
(iii) a bayonet mount;
(iv) a flash suppressor or threaded barrel designed to accommodate a flash suppressor; and
(v) a grenade launcher;
(C) a semiautomatic pistol that has ability to accept a detachable magazine and has at least 2 of -
(i) an ammunition magazine that attaches to the pistol outside of the pistol grip;
(ii) a threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or silencer;
(iii) a shroud that is attached to, or partially or completely encircles, the barrel and that permits the shooter to       hold the firearm with the nontrigger hand without being burned;
(iv) a manufactured weight of 50 ounces or more when the pistol is unloaded ; and
(v) a semiautomatic version of an automatic firearm; and
(D) a semiautomatic shotgun that has at least 2 of -
(i) a folding or telescoping stock;
(ii) a pistol grip that protrudes conspicuously beneath the action of the weapon;
(iii) a fixed magazine capacity in excess of 5 rounds; and
(iv) an ability to accept a detachable magazine.
922(v).....

      (1)
It shall be unlawful for a person to manufacture, transfer, or possess a semiautomatic assault weapon.

(2) Paragraph (1) shall not apply to the possession or transfer of any semiautomatic assault weapon otherwise lawfully         possessed under Federal law on the date of the enactment of this subsection.

(3) Paragraph (1) shall not apply to -

(A) any of the firearms, or replicas or duplicates of the firearms, specified in Appendix A to this section, as      such firearms were manufactured on October 1, 1993;

(B) any firearm that -

(i) is manually operated by bolt, pump, lever, or slide action;
(ii) has been rendered permanently inoperable; or
(iii) is an antique firearm.
(C) any semiautomatic rifle that cannot accept a detachable magazine that holds more than 5 rounds of ammunition; or

(D) any semiautomatic shotgun that cannot hold more than 5 rounds of ammunition in a fixed or detachable magazine.

The fact that a firearm is not listed in Appendix A shall not be construed to mean that paragraph (1) applies to such firearm. No firearm exempted by this subsection shall be deleted from Appendix A so long as this subsection is in effect.

(4) Paragraph (1) shall not apply to -
(A) the manufacture for, transfer to, or possession by the United States or a department or agency of the United States or a State or a department, agency, or political subdivision of a State, or a transfer to or possession by a law enforcement officer employed by such an entity for purposes of law enforcement (whether on or off duty);

(B) the transfer to a licensee under title I of the Atomic Energy Act of 1954 for purposes of establishing and maintaining an on-site physical protection system and security organization required by Federal law, or possession by an employee or contractor or such licensee on-site for such purposes of off-site for purposes of licensee-authorized training or transportation of nuclear materials;

(C) the possession, by an individual who is retired from service with a law enforcement agency and is not otherwise prohibited form receiving a firearm, of a semiautomatic assault weapon transferred to the individual by the agency upon such retirement; or

(D) the manufacture, transfer, or possession of a semiautomatic assault weapon by a licensed manufacturer or licensed imported for the purposes of testing or experimentation authorized by the Secretary.

923(i) ... The serial number of any semiautomatic assault weapon manufactured after the date of the enactment of this sentence shall clearly show the date on which the weapon was manufactured.

924(c)(1) Whoever, during and in relation to any crime of violence or drug trafficking crime (including a crime of violence or drug trafficking crime which provides for an enhanced punishment if committed by the use of a deadly or dangerous weapon or device) for which he may be prosecuted in a court of the United States, uses or carries a firearm, shall in addition to the punishment provided for such crime of violence or drug trafficking crime, be sentenced to imprisonment for five years, and if the firearm is a short-barreled rifle, short barreled shotgun, or semiautomatic assault weapon to imprisonment for ten years...

 
18 U.S.C. Chapter 44

921(a)(31) The term 'large capacity ammunition feeding device' -

(A) means a magazine, belt, drum, feed strip, or similar device manufactures after the date of enactment of the Violent Crime Control and Law Enforcement Act of 1994 that has a capacity of, or that can be readily restored or converted to accept, more than 10 rounds of ammunition: but

(B) does not include an attached tubular device designed to accept, and capable of operating only with .22 caliber rimfire ammunition.

922(w)(1) Except as provided in paragraph (2), it shall be unlawful for a person to transfer or posses a large capacity ammunition feeding device.
(2) Paragraph (1) shall not apply to the possession or transfer of any large capacity ammunition feeding devices otherwise lawfully possessed on or before the date of the enactment of this subsection.

(3) This subsection shall not apply to --

(A) the manufacture for, transfer to, or possession by the United States or a department or agency of the United States or a department or a State or a department, agency or political subdivision of a State, or transfer to or possession by a law enforcement officer employed by such an entity for purposes of law enforcement (weather on or off duty);

(B) the transfer to a licensee under title I of the Atomic Energy Act of 1954 for purposes of establishing and maintaining an on-site physical protection system and security organization required by Federal law, or possession by an employee or contractor or such licensee on-site for such purposes of off-site for purposes of licensee-authorized training or transportation of nuclear materials;

(C) the possession, by an individual who is retired from service with a law enforcement agency and is not otherwise prohibited from receiving ammunition, of a large capacity ammunition feeding device transferred to the individual by the agency upon such retirement; or

(D) the manufacture, transfer, or possession of any large capacity ammunition feeding device by a licensed manufacturer or licensed importer for the purposes of testing or experimentation authorized by the Secretary.

(4) If a person charged with violating paragraph (1) asserts that paragraph (1) does not apply to such person because of paragraph (2) or (3), the Government shall have the burden of proof to show that such paragraph (1) applies to such a person. The lack of a serial number as described in section 923(i) of title 18, United States Code, shall not be a presumption that the large capacity ammunition feeding device is not subject to the prohibition of possession in paragraph (1).
923(i) ... A large capacity ammunition feeding device manufactured after the date of the enactment of this sentence shall be identified by a serial number that clearly shows that the device was manufactured or imported after the effective date of this subsection, and such other identification as the Secretary may by regulation prescribe.


Last Modified:
 19-Jun-2001